KTM Power Parts 60712964044 Mode D'emploi page 15

- Position the combination instrument.
- Mount original screws with bushings and tighten to 2 Nm.
- Plug in connector .
- Position the headlight.
- Mount screw but do not tighten yet.
Final steps
- Check the setting of the lighting system (see the Owner's Manual).
- Adjust the headlamp (see the Owner's Manual).
Operation
- Activate the grip heater in the menu under "Settings".
- Navigate through the menu until "grip heater" is shown in the display.
- Open the menu and select a heating level or switch the heated grips
on or off.
15