SECTION 4
4.1 Introduction – Operational Safety
DANGER
WARNING
WARNING
Electric Shock Can Kill!
Disconnect current supply at wall disconnect before servicing
console, torch or plumbing box.
•
Do not operate console or plumbing box with any covers
removed/open.
•
Do not touch any torch front-end parts with power on.
•
Do not attempt to service any portion of this plasma
system unless power has been disconnected at the wall
disconnect.
This equipment can be hazardous if not properly
operated and maintained.
Read and understand all equipment literature and warning labels
before operating this equipment.
Plasma Arc Cutting Can Be Hazardous To Eyes And
Ears.
•
Wear hearing protection.
•
Wear eye protection specifi cally designed for arc
welding and cutting. Lenses should be at least a No. 6
or No. 7 lens shade.
•
Wear protective clothing to avoid skin burns.
97
OPERATION