Mode Settings; Operating Mode - Trilux LMS HFS RMC Instructions D'emploi

Mode settings

Mode function:

Operating mode (

Required remote control buttons:
Mode button
+
(within 10 secs.)
Configuration button
Configuration button
10 seconds after LED feedback (for the set
level) a rapid flashing sequence on the LED
is displayed (approx. 2 to 3 seconds) to show
operational readiness of the luminaire.
50
P)
press =
P
red control LED in the luminaire flashes
(feedback of last setting)
1
press = permanent mode
red control LED in the luminaire acknowledges 1x
2
press = time limited mode
red control LED in the luminaire acknowledges 2x
51