Overview Of Lms Hfs Rmc; Signal Strength (Sens); Hold Time (Time); Light Value (Lux) - Trilux LMS HFS RMC Instructions D'emploi

Overview of LMS HFS RMC

function buttons:

Signal strength (SENS)

The sensitivity button is for setting sensor
sensitivity/range of the HF signal.

Hold time (TIME)

The hold time button enables the setting of
various hold times (= illumination duration
following previously detected movement by
the sensor).

Light value (LUX)

The light sensor button is required for setting
the daylight sensor (threshold switch).

Dimming level (DIM)

The DIM button enables the setting of mini-
mum DIM values between 0% - 50% for the
luminaire (residual lighting level).
This level can be optionally set to continuous
or time-limited following expiry of the hold
time.
36
1
4 2
5
3
P
T
D
SENS
DIM
TIME LUX
37