Stabiliser S2 Assembly - NF GENERIS 750 Notice De Montage Et D'utilisation

3-5-1 - Stabiliser S2 assembly

5. Unpin and remove the adjustable leg from the stabiliser S1 (red).
6. Insert the adjustable leg into the brace tube (blue) and secure with the split pin.
7. Connect the stabiliser S1 without leg (red) with the clevis of the brace tube (blue) with the
M12 screw + nut.
8. Tighten the screw + nut assembly with an 18mm flat spanner.
9. Connect and tighten the brace arm with the brace tube using the clamp.
1
2
3
5
4
106-A000035745 - ind.0 – 11/2021
83