NF GENERIS 750 Notice De Montage Et D'utilisation page 69

3-1-6 – Extensions assembly
1. Fit the 0.6m extension with the 1.50m ladder.
2. Pin the extension with the two split pins code 34122.
Note that the 0.60m extension is strictly intended as an end extension. It should always be placed
on top.
It should not be assembled as an intermediary section.
3. Fit the 1.50m extension + 0.60m extension onto the previously assembled extension.
4. Pin the extension with the two split pins code 34122.
5. Repeat steps 1 and 2 for the second 1.50m extension + 0.60m extension.
106-A000035745 - ind.0 – 11/2021
1
2
69