2-6. Safety precautions for erection, modification and use
• The instruction manual should be available at the site where the mobile scaffolding is being erected
and used.
• This mobile scaffolding should only be used in accordance with this manual, and should not be
modified in any way.
• This scaffolding should only be used in accordance with national regulations.
• It should be used intentionally as a means of accessing the working area.
• Before assembling the scaffolding, the chosen site should be checked to identify and prevent hazards
during its assembly, modification and dismantling, including, and without limitation:
• ground conditions;
• the level of the slope;
• obstacles (on the ground or in the air);
• weather conditions;
• hazardous electrical phenomena.
• Ensure that all necessary split pins and bolts are firmly in place
• GENERIS G750 and G950 should only be erected and dismantled by personnel trained in assembling
and using the mobile tower.
• User training courses are not a substitute for instruction manuals, but can complement them.
• Only original TUBESCA-COMABI components, as specified in this manual, should be used.
• Damaged or faulty components should not be used. Only original TUBESCA-COMABI components
should be used.
• For assembling each element, refer to the previous diagrams in sections §2-5.
• PPE (Personal Protective Equipment) must be worn for assembly and dismantling.
• Stabilisers should always be installed when they are required.
• Two-person assembly is required.
• Hauling up items to raise the height of the product can be done from the guard rail side once this has
been installed.
• Hauling up tools or other items whilst the product is in use can be done through platform access trap
doors.
• This product should only be used in accordance with the instruction manual.
• Mobile access and working towers designed in accordance with EN 1004-1 are not anchor points for
fall arrest systems.
• Working on a platform is only allowed if there is a complete guard rail consisting of handrails,
intermediate rails and toeboards.
• After assembly or modification, the following basic information should be displayed on the mobile
scaffolding, and it should be clearly visible from the ground (on a label, for example):
• The name and contact details of the person in charge;
• Whether the mobile scaffolding is ready for use or not;
• The load category and the uniformly distributed load value for the scaffolding;
• Whether the mobile scaffolding is solely intended for interior use only;
• The assembly date.
• The telescopic legs are only used to correct the level of uneven grounds.
106-A000035745 - ind.0 – 11/2021
65