NF GENERIS 750 Notice De Montage Et D'utilisation page 81

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4
14. Mount the 2 temporary guard rails on rung no. 20.
15. Mount the two 1.50m extensions (without the 0.60m extension) by following §3-1-6.
16. Remove the 2 temporary guard rails, and then mount them definitively on rung no. 24 by
following § 3-1-7.
17. Mount the 9
18. Mount the 3rd permanent platform on rung no. 21 by following § 3-1-9.
19. Mount the 7
20. Mount the two 1.50m + 0.60m extensions by following §3-1-6.
21. Mount the 7
22. Mount the 11
23. Mount the 4
24. Mount the access cradle by following §3-1-12.
25. Check the position of components by following §2-5-4.
26. For heights below the 8.80m platform, lower the guard rails and platforms according to the
required height. If necessary, remove the 1
27. Note that the distance between rungs = 300mm.
28. To comply with EN1004-1, the minimum height between platforms must always be 2.10m,
and the height of the first platform must be <3.40m.
106-A000035745 - ind.0 – 11/2021
th
th
and 10
cross braces by following § 3-1-10.
th
th
and 8
cross braces by following §3-1-10.
th
th
and 8
guard rails on rung no. 31.
th
th
and 12
guard rails by following §3-1-10.
th
and last platform on rung no. 28 by following §3-1-9.
st
platform along with the 1
st
nd
and 2
guard rails.
81

Publicité

Table des Matières
loading

Produits Connexes pour NF GENERIS 750

Ce manuel est également adapté pour:

Generis 950

Table des Matières