Storage Charge Mode - Team Orion TWINSPEC advantage Manuel D'instructions

Storage charge mode

The special storage mode will discharge/charge your batteries so that they are in optimal state for
storage. Doing this will minimize the risk of cell damage due to deep discharge if the batteries are
stored for a long period of time.
The charge and discharge settings of the actual memory profile will be used, make sure that the
settings are compatible with the battery.
 If the battery is properly connected and functional, the storage charge or discharge will start.
 If the selected battery type is NiMH or NiCd, the battery will be discharged, then recharged to 50%
of the selected capacity.
 If the selected battery type is LiPo or LiFe, the battery will be charged/discharged and balanced
to 3.85V/cell for LiPo and 3.3V/cell for LiFe.
24
From the main screen, use the + or - keys to select
the storage mode from the main screen (indicated
by "STORAGE").
Press and hold the ENTER key. The battery check will
be displayed.
Team Orion Advantage Twin Spec
Charge screen
 By pressing the ENTER key you can modify the charge/discharge current during the charge/
discharge.
 During the charge/discharge, using the + and – keys, you can display various data about the charger
and battery. Please refer to screen overview sheet for more information.
At the end of the storage charge, the "BATTERY STORAGE COMPLETE" message will appear.
Press the ENTER key to display the final storage data. By pressing the + and – keys you can display
various information about the charger and battery. Please refer to screen overview sheet for more
information.
Note: depending on the conditions of use, the thermal protection might activate so that the charger
can cool down. After a brief interruption the charge/discharge will resume and continue normally.
www.teamorion.com
Discharge screen
Press the ENTER key to go
back to the main storage screen.
25