Keys; Charging; Charge Settings - Team Orion TWINSPEC advantage Manuel D'instructions

10

Keys

The charger is equipped with 5 keys to use and adjust
the various functions.
DECREASE - key:
Changes function mode
Changes data display
Decreases the value of the selected setting
INCREASE + key:
Changes function mode
Changes data display
Increases the value of the selected setting
ENTER key:
Start and stop selected function
Validate a modification
MENU key:
Selects function mode, charger settings or data display.
CHANNEL (CH) key:
Selects the charge output, left (1) or right (2)
Team Orion Advantage Twin Spec
Select the memory profile referring to the battery type you wish to charge. If no compatible settings
are available, you will have to make your own settings.
To make your own settings, press the ENTER key to enter setup mode. Select the memory profile
to use, the battery type, the number of cells, the cell's capacity, the charge rate (1C by default) and
depending on the battery type, the delta-peak value or if you wish to use balancing or not (only for
LiPo/LiFe).
Once the proper settings are made, press the ENTER key until the battery check and then the charge
screen appear. Your battery is now charging and the charge will be automatically interrupted once
the battery is full.

Charge settings

Follow this procedure to modify the charge settings to meet the battery requirements. From the main
screen, use "+" or "-" to select charge mode (indicated by Charge).
Warning! If you are not familiar with charging batteries, read these instructions carefully. You
must use the proper settings to charge your batteries in a safe and reliable way. Using incorrect
settings can result in damage to personal property and be harmful to people. Always follow the
manufacturer's charge recommendations.
Note: make sure you are adjusting the settings for the correct channel you wish to use.
www.teamorion.com

Charging

11