Restore Factory Default Settings; Check Battery Charge Status; Computer Software - Team Orion Vortex DSB R+ Mode D'emploi

4. After you have made the modifications, make sure you
save the changes by pressing the "save" key.
Note: available parameters vary depending on the ESC type.
Refer to the ESC user manual.

RESTORE FACTORY DEFAULT SETTINGS

You can restore the factory default settings for the current
profile by pressing the "save" key while "Restore Default" is
displayed on the screen.

CHECK BATTERY CHARGE STATUS

The program box can check the charge status of your
batteries. To use this function, connect your LiPo/LiFe
battery to the program box using the balancing connector
of the battery. The display shows the total battery voltage,
charge percentage and also a graphical representation of
the battery charge status.
Note: make sure to respect the polarity as indicated on the
program box

COMPUTER SOFTWARE

The computer software allows you to update the program
box and ESC firmware (which are two separate firmware)
and modify the ESC parameters (as with the program box).
You can find the latest version of the computer software on
our www.teamorion.com/R10-downloads.html website. All
of the available ESC and program box firmware are included
www.teamorion.com 7