Saeco-Card Assembly Kits - Saeco BOX MONETIERA Instructions

the connectors shown in figure 18.
(Fig.18)
Fasten the template with the rivets provided with the box.
(Fig.19)
(Fig.20)
Activate the system as described in section "Payment system
activation".
6.2 Saeco-Card assembly kit
The Saeco-Card assembly kit includes:
1. 1 MB Saeco-Card external antenna
2. 1 Electronic card
3. 4 Spacers for electronic card
4. 1 6-pole connector
5. 4 Screws for fastening external antenna.
6.2.1 Installation
Use a template prepared for installing the Saeco-Card
(Fig.21)
Remove the antenna and slot the cable through the hole as
shown in figure 22.
(Fig.22)
Fasten the antenna with the screws (Fig.23).
(Fig.23)
English
25