Saeco BOX MONETIERA Instructions page 26

English
Install the spacers in the support inside the box (Fig.24).
(Fig.24)
Fasten the Saeco-Card electronic card onto the spacers
(Fig.25).
(Fig.25)
Connect the Saeco-Card electronic card to the interface
card using the flat cable provided with the kit (Fig.26).
(Fig.26)
26
Connect the antenna to the Saeco-Card electronic card
(Fig.27).
(Fig.27)
Fasten the template with the rivets provided with the box.
(Fig.28)
(Fig.29)
Activate the system as described in section "Payment system
activation"