Time Setting; Band Shortening Instruction For Model - Auriol 2-LD4517 Manuel D'utilisation

If the device will not be used for an extended time
period, remove the battery and store the device in a
dry and dust-free area. Improper use of the battery
can lead to explosion or leakage.
If the battery leaks, avoid contact with skin, eyes
and mucous membranes. Use gloves. If you are
exposed to battery acid, rinse the affected areas
with plenty of clean water and immediately seek
medical attention. Remove discharged batteries
from the device as they present an increased risk of
leakage.

Time setting

Carefully pull the crown out all the way. Turn the
crown clockwise or counter clockwise to set the
time. Press the crown back to the case to complete
the setting.
Band shortening instruction for
model 2-LD4517-4
Band shortening can be accomplished by removing
links. Open the band clasp safety and open the
clasp. The band is held to the clasp by a spring bar.
Image 1. Compress and remove the spring bar by
using a pointed tool. Now place the watch face
down on a soft surface. Image 2. The links that can
be removed are marked with an arrow. Image 3.
Place the band in the band changing tool in such a
way that the pointed end of the tool points directly
at the metal rod and the metal rod can be pushed
out in the direction of the arrow. Carefully turn the
screw clockwise until the metal rod is pushed out a
small distance. The rod can now be pulled out
(using pliers if necessary). The strap can now be
taken disassembled. Remove as many links as
necessary using this method. Reinsert the rod in the
opposite direction of the arrow and push it back into
the band. The strap and clasp can now be
reassembled.
A replacement tip for the tool is included in the
bottom of the tool.
An instructional video is available for online viewing
at the following URL:
http://specials.lidl.com/videos/nou9nohN/
...or simply scan the following QR code:
- 3 -