Maintenance And Cleaning; Accessories - IKA RET control /t Mode D'emploi

17

Maintenance and cleaning

The RET control / t is maintenance-free. It is subject only to the
natural wear and tear of components and their statistical failure
rate.
Use only cleansing agents which have been approved by IKA to
clean IKA devices.
To remove use:
Dyes isopropyl alcohol
Construction materials water containing tenside / isopropyl alcohol
Cosmetics water containing tenside / isopropyl alcohol
Foodstuffs water containing tenside
Fuels water containing tenside
For materials which are not listed, please request information from
IKA.
Wear the proper protective gloves during cleaning of the devices.
Electrical devices may not be placed in the cleansing agent for the
purpose of cleaning.
Before using another than the recommended method for cleaning
or decontamination, the user must ascertain with the manufactu-
rer that this method does not destroy the instrument.
Spare parts order
When ordering spare parts, please give:
- machine type,
- manufacturing number, see type plate,
- item and designation of the spare part, see www.ika.net, spare
parts diagram and spare parts list.
Please send in equipment for repair only after it has been cle-
aned and is free from any materials which may constitute a
health hazard.
Send in the case of service the equipment back in the original
packaging zurück. Storage packing is not sufficient for the back
dispatch. Use additionally a suitable transportation packing.
46
18

Accessories

• PT 100.50 PT 100 Temperature measuring sensor,
stainless steel, DIN EN 60751 Cl. A
• PT 100.51 PT 100 Temperature measuring sensor,
glass-coated, DIN EN 60751 Cl. A
• PT 1000.50 Two-way PT 1000 Temperature measuring
sensor, stainless steel, DIN EN 60751 Cl. A
• PT 1000.51 Two-way PT 1000 Temperature measuring
sensor, class-coated, DIN EN 60751 Cl. A
• H 15 Bath top stainless steel 1,5 l
• H 16V Support rod
• H 36 Holding rod
• H 44 Cross sleeve
• H 28 Bath top stainless steel 1 l
• H 29 Oil bath top aluminium 1 l
• H 30 Oil bath top aluminium 1,5 l
• RS 1 Set of stirring bars
• RSE PTFE-stirring bar remover
• PC 5.1 Adapter
• PC 1.2 Adapter
• PC 1.5 Cabel
• PC 2.1 Cabel
• AK 2.1 Cabel
• AK 2.2 Cabel
• labworldsoft
Recommended IKA-stirring bars
• TRIKA-stirring bar PTFE, triangular, lenghts 25, 40 and 55 mm
• IKAFLON-stirring bar PTFE
ø 6mm lenghts 10 and 15 mm
ø 8mm lenghts 20, 25, 30, 40, 50 and 60 mm
022009