Starting and using
MCS use (optional)
WARNING
Do not use the MCS if the wand is oriented towards you or another
person.
NOTE
For MCS proper functioning, the steam wand and its terminal need
to be cleaned properly after use. It is also recommended to remove
the terminal from the steam wand, clean it and put back in place
at least twice a day (depending on frequency of use).
To obtain a good milk foam, fill the pitcher with a quantity of milk
that covers at least the steam wand terminal and place the wand
into the pitcher in a side of position, so to help creating a vortex
during milk heating.
The MCS is an automatic milk steaming system.
Thanks to the MCS, milk is heated at a pre-set temperature and the
foam obtained can be compared to the foam produced by the best
baristas.
| 51