Setting The Extraction Volume; Manual Operation - Abicor Binzel xFUME ADVANCED 115V-CSA Mode D'emploi

7 Operation

7.1 Setting the extraction volume

7.2 Manual operation

The device is operated in manual mode (deactivated automatic starting function) as follows:
 Abb. 3 Control elements/ports on page EN-10
EN - 16
xFUME™ ADVANCED 115V – CSA
To set the extraction volume, turn the output
1
regulator to the right or left.
Set the <Auto/Manual> switch to <Manual> to
1
deactivate the automatic starting function.
Set the <On/Off> switch to <On>.
2
The filter membranes are cleaned once.
Continuous extraction is started.