xFUME™ ADVANCED 115V – CSA
9.5 Replacing the turbines
Electric shock due to electronic component damage
When replacing carbon brushes and turbines, electrical connections must be disconnected and
reconnected. Fatal electric shock may occur if electronic components become damaged or improperly
uninstalled in the process.
► The carbon brushes and turbines should be replaced only by a qualified electrician.
WARNING
9 Maintenance and cleaning
Loosen the clamps on the sides and remove the
1
top section with the handle.
Loosen the screws (4×) and remove the cover.
2
Dispose of the turbines in accordance with local
3
regulations.
12 Disposal on page EN-28
Insert the new turbines, attach the turbine clamps,
4
and establish the electrical connection.
Reverse the steps above to reassemble the system.
5
EN - 25