EN
ORIGINAL INSTRUCTIONS
These instructions apply to all Roll Up 28 drive, the different versions of which are available in the current catalogue.
1. PRIOR INFORMATION
1. 1. SPHERE OF APPLICATION
Roll Up 28 drives are designed to drive most types of interior roller and roman blinds.
The installer, a home motorisation or home automation professional, must ensure that once the driven product
is installed, it respects the current standards in the country of installation, notably standard EN 13120 relative to
interior blinds.
1. 2. LIABILITY
Before installing and using the drive, please read these instructions carefully. In addition to the instructions provided
in this guide, please also comply with the instructions set out in the enclosed Safety instructions document.
The drive must be installed by a home motorisation and automation professional, in accordance with Somfy's
instructions and the applicable regulations in the country of installation.
Any operation of the drive outside the sphere of application described above is prohibited. Such operation
shall exclude Somfy from all liability and invalidate the Somfy warranty, as will any failure to comply with the
instructions given herein and in the enclosed Safety instructions document.
After installing the drive, the installer must inform his customers of the operating and maintenance conditions
for the drive and must pass the operating and maintenance instructions on to them, as well as the enclosed
Safety instructions document. Any After-Sales Service operation on the drive requires intervention by a home
motorisation and automation professional.
Should any doubt arise during installation of the drive or for additional information, consult a Somfy contact or
visit www.somfy.com.
⚠
Safety Warning !
2
Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved
CONTENTS
2
2
2
3
3
4
4
6
1
Warning !
Roll Up 28 WireFree RTS
12
Β
Information
9
9
9
9
10
10
11
11