Display Illumination - switel WTC 525 Mode D'emploi

Operating the Walkie−Talkies
29
Key lock on/off
The key lock function prevents inadvertent modification of settings. When the key lock function is activated, the
the display.
a M
a M
Confirmation signal ('Roger' beep)
The confirmation signal is issued on releasing the P button. This signals to the caller that you have ended transmission.
31
Activating/Deactivating the confirmation signal
4 x M
X/Y, P

Display illumination

The display illumination lights up for 4 seconds on pressing any button except the P button.
1
VOX (handsfree)
When this function is active, the walkie−talkie automatically starts to transmit when the unit detects a voice or a sound.
Activating VOX mode
When using the handsfree function in VOX mode, conversation is carried out via the walkie−talkie. The P button on the walkie−
talkie must not be pressed to transmit. When VOX mode is activate, VOX appears in the display.
5 x M
X/Y, P
Headset connection port
A connection port is available beside the antenna with which to connect a headset. Use a commercially available headset without
a PTT button and equipped with a 3−pin, 2.5 mm jack plug. We assume no liability for the function.
1
VOX: Voice Operated Transmission = Activation on detecting a sound
36
The P, C and V buttons work even if the key lock function is on.
30
When you start to speak, there is a slight delay before the walkie−talkie starts to transmit.
Activate the key lock function
Deactivate the key lock function
Activate Setting mode
Select ON / OF and confirm it
Activate Setting mode
Select ON / OF and confirm it
icon appears in