switel WTC 525 Mode D'emploi page 32

Putting the Walkie−Talkies into Operation
Charging the walkie−talkies directly
Connect the power adapter plug to the walkie−talkie headset/charging socket. For safety reasons, only use the power adapter plug
supplied.
Note:
Only use the power adapter plug
supplied labelled with No. CSD0750200G
The current battery charge status is indicated in the display:
Attaching/Detaching the belt clip
Slide the belt clip in the guide from the top until it audibly snaps into place. To detach
the belt clip, pull the fastening tab up a little with your fingernail and slide the belt clip
upwards.
Energy−save mode
Your walkie−talkies are provided with an energy−save mode to increase the service life of the batteries. If no buttons on the walkie−
talkies are pressed for a period of 4 seconds, energy−save mode is activated. Energy−save mode is deactivated as soon as you
press a button or a signal is received.
32
Before using the walkie−talkies for the first time, charge them for at least 10 hours. Do not use the walkie−talkies when
they are being charged.
Mains power outlet
Full
The walkie−talkies need to be recharged as soon as the indicator flashes in the display and three acoustic warning signals
have been issued.
25
Empty Unit switches off