EN
3. USE AND MAINTENANCE
This drive does not require any maintenance operation.
3. 1. "UP" AND "DOWN" FUNCTIONS
Briefly press the "Up" or "Down" button: the motorised
product moves upwards or downwards.
3. 2. STOP FUNCTION
The motorised product is moving.
Press the "my" button: the motorised product stops.
3. 3. FAVOURITE POSITION MY
Besides the upper and lower positions, an intermediate position known as the "favourite (my)
position" may be programmed in the motor.
3. 3. 1. To program, modify or delete the favourite (my) position:
Place the motorised product in the desired favourite
1)
position (my).
Press the "my" button until the motorised product moves up
2)
and down: the new favourite (my) position is programmed
and the previous favourite (my) position is deleted.
A favourite position cannot be programmed at the travel end stop positions.
3. 3. 2. To use the favourite (my) position:
The motorised product must not be in motion.
Press the "my" button: the motorised product moves to the
favourite (my) position.
3. 4. OPERATION WITH SENSORS
Refer to the corresponding instructions.
Do not pair wind sensors with the drive. The drive will not operational.
3. 5. TIPS AND RECOMMENDATIONS FOR USE
3. 5. 1. Questions about the drive?
Observations
The motorised
product does not
operate.
If the motorised product still does not work, contact a drive and home automation professional.
3. 5. 2. Adding/Deleting Somfy io control points and sensors
Refer to the corresponding instructions.
3. 5. 3. Replacing a lost or broken Somfy io-homecontrol® control point
To replace a lost or broken io-homecontrol® control point, contact a drive and home automation
professional.
40
Possible causes
The Somfy io control point battery is
low.
The motor is hot.
Copyright
1)
Check whether the battery is weak and
replace it if necessary.
Wait until the motor cools down.
2017 SOMFY ACTIVITES SA, Société Anonime All rights reserved.
©
ALTUS RS 50 io - ALTUS RS 60 io
2)
my
my
Solutions