Use And Maintenance; Tips And Recommendations For Use; Technical Data - SOMFY HOME MOTION Sonesse 50 RS485 Notice

3. USE AND mAINTENANCE

This motorisation is maintenance-free
3.1. oPERATIoN
To control the motor, please refer to the installation instruction of the used control.

3.2. TIPS AND RECommENDATIoNS FoR USE

3.2.1. Questions about the Sonesse 50?
Observations
The motorised
product does not
operate.
If the motorised product still does not work, contact a motorisation and home automation
professional.

4. TEChNICAl DATA

Power supply
Operating
temperature
Index protection
rating
Safety level
Connector
Somfy hereby declares that the drive covered by these instructions when marked for input voltage 230V 50Hz when used as
intended according to these instructions, is in compliance with the essential requirements of the Machinery Directive 2006/42/EC
and the EMC Directive 2004/108/EC.
An EC declaration of conformity detailing standards and specifications used and stating all particulars for identification of the drive,
name and address of the person(s) authorised to compile the technical file and empowered to draw up the declaration including place and date of
issue can be found at the Internet address www.somfy.com/ce.
Copyright © 2014 Somfy SAS. All rights reserved.
Possible causes
The control point battery is weak.
The motorisation is in thermal
protection mode.
230V-50Hz
Check whether the battery is weak and
replace it if necessary.
Wait for the motor to cool down.
120V-60Hz 100V-50/60Hz
- 20°C to + 60°C
IP 44
Class I
RJ9
Solutions
220V-60Hz
EN
7