Télécharger Imprimer la page

Use And Maintenance; Up And Down Buttons; Stop Function; Favourite Position (My) - SOMFY OXIMO 40 AUTO io Notice

Publicité

Les langues disponibles

Les langues disponibles

2.4.3. Replacing a lost or broken Somfy io-homecontrol
Only switch off the power for the motorised product to be reset.
This reset deletes all the local control points, however
the sensors, end limit settings and favourite position are
retained.
Position the motorised product at the mid-height position.
1)
Cut the power supply for 2 seconds.
2)
3)
Switch the power supply back on for 5 to 15 seconds.
4)
Cut the power supply for 2 seconds.
5)
motorised product
moves for a few seconds. (If the motorised product is in
the upper or lower limit position, it will move up and down).
6)
motorised product
point is programmed and all the other control points are
deleted.
Only switch off the power for the motorised product to be reset.
This reset deletes all control points, all the sensors and all the end limit settings, and resets the drive's

favourite position (my).

Position the motorised product at the mid-height position.
1)
2)
Cut the power supply for 2 seconds.
Switch the power supply back on for 5 to 15 seconds.
3)
4)
Cut the power supply for 2 seconds.
5)
moves for a few seconds.
6)
-
section).
Copyright © 2014 Somfy SAS. All rights reserved.
EN
®
control point
1)
2)
OFF
2 s
5 s
3)
4)
ON
OFF
15 s
2 s
5)
ON
6)
my
1)
2)
OFF
2 s
5 s
3)
4)
ON
OFF
®
15 s
2 s
5)
ON
6)
my
7
PROG.
S
27
Images not contractually binding
EN

3. USE AND MAINTENANCE

This drive is maintenance-free.

3.1. UP AND DOWN BUTTONS

product.

3.2. STOP FUNCTION

The motorised product is moving.
-
3.3. FAVOURITE POSITION (MY)
Besides the upper and lower positions, an intermediate position known as the "favourite position
(my)" is programmed as standard in the OXIMO 40 AUTO io drive.
-
favourite position.
-
stops in the favourite position (my).
To modify or delete the favourite (my) position, see the section
entitled "Additional settings".
3.4. OPERATING WITH A SOMFY IO-HOMECONTROL
SUNIS WIREFREE™ IO)

3.5. ADDITIONAL SETTINGS

3.5.1. Modifying the favourite position (my)
1)
Place the motorised product in the desired favourite position
(my).
2)
programmed.
3.5.2. Deleting the favourite position (my)
1)
in the favourite position (my).
2)
favourite position (my) has been deleted
.
28
Images not contractually binding
my
my
®
SUN SENSOR (SUCH AS
1)
2)
my
1)
2)
my
my
Copyright © 2014 Somfy SAS. All rights reserved.

Publicité

loading

Ce manuel est également adapté pour:

Oximo 50 wt