Restoring The Original Configuration - SOMFY ALTUS RS 50 io Notice

ALTUS RS 50 io - ALTUS RS 60 io
2. 4. 3. Restoring the original configuration
Only switch o the power for the motorised product to be
reset.
This reset deletes all control points, sensors and travel end
stop settings and resets the favourite (my) position of the
motorised product.
Position the motorised product at the mid-height position.
1)
Cut the power supply for 2 seconds.
2)
Switch the power supply back on for 5 to 15 seconds.
3)
Cut the power supply for 2 seconds.
4)
Restore the power supply: the motorised product moves for
5)
a few seconds.
Press the PROG
6)
io-homecontrol® control point for
the motorised product moves up and down twice:
The drive is now reset to its original configuration.
Copyright 2017 SOMFY ACTIVITES SA, Société Anonime All rights reserved.
©
button on the local
7 seconds, until
1)
5 seconds.
3)
ON
15 seconds.
5)
ON
Somfy
6)
EN
2)
OFF
2 sec.
4)
OFF
2 sec.
my
39