Instructions for Behnke SIP 2.0
GB
Camera configuration
14.2. Reset to default settings
(For 20/50 series camera modules, remove the camera cover before resetting)
▸
The camera may be returned to default
settings after initialisation (approx. 2 minutes
after power on) when the red LED
nently illuminated.
▸
Please press the reset button
pressed for at least three seconds.
70
▸
The red LED
the reset button and increases the flashing
is perma-
intervals once the button is let go. Afterwards,
the camera will reboot.
and keep it
▸
As soon as the red indicator LED
again permanently illuminated, the camera
has been returned to its default settings and
is ready to go.
starts flashing upon pressing
is once
www.behnke-online.de