Reset To Default Settings - Telecom Behnke 20-0040-IP Mode D'emploi

Additional SIP door bell / SIP PA system connection
GB GB

Reset to default settings

reset to defAult settings
4.
The web interface provides the option to reset
the door intercom station to its default settings,
please see the following description of the
necessary steps to do so:
▸ Power off the SIP door intercom
▸
Press and hold the buttons T1 and T2
▸
Power on the SIP door intercom station
▸
Keep buttons T1 and T2 pressed until the two
LEDs (green, blue) start flashing every second
▸ Release buttons T1 and T2
▸
The remote station will be reset to default
settings
this process takes approx. 90 seconds
The reset is completed successfully, once you
have heard a confirmation signal from the
loudspeaker.
38
The web interface provides a second option to
reset the door intercom station to its default
settings, please see the following description of
the necessary steps to do so:
Admin
Reset
Restore
www.behnke-online.com