Technical Data - Jonsered GC2128 Manuel D'utilisation

Technical data

Engine
3
Cylinder volume, cu.in./cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, hp/kW
Catalytic converter muffler
Speed- -regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/liter
Weight
Weight without fuel, cutting attachment and guard, lbs/kg
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3- -1997, dB(A),
min/max:
Vibration levels
Vibration levels at handles, measured according to
2
ANSIB175.3- -1997, m/s
At idle, left/right handles:
At max. speed, left/right handles:
NOTE! This spark ignition system complies with the Canadian standard ICES- -002.
Note 1: Equivalent noise pressure level is calculated as the time- -weighted energy total for
noise pressure levels under various working conditions with the following time distribution:
1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all
the machine's approved cutting equipment fitted. The table indicates the highest and lowest
values.
Model GC2128 (M10 LH arbor shaft thread)
Approved accessories Type
Trimmer head T25
545186856 Rev. 8 5/15/12
TECHNICAL DATA
Cutting attachment / guard, part. no.
537 33 83- -06 / 545 081 703
GC2128
1.7/28
1.4/35
1.130/28.7
2,800- -3,200
10,000
8,000
1.1/0.8
Yes
Yes
Walbro/CD
Champion RCJ- -8Y
0.024/0.6
Zama
0.85/0.4
11/4.8
94/97
3/5
9/8
English--- 20