Antari HZ-500 Mode D'emploi page 8

The display indicates the set time interval. The unit counts down to 0 seconds and emits haze. To
deactivate the timer mode, press the button TIMER again.
-Menu settings with the button FUNCTION
1. Setting time intervals for timer operation
Press the button FUNCTION until the display indicates »Interval Set«. Use the buttons UP and DOWN to
adjust the intervals between the individual fog outputs in timer mode within the range of 1 and 200
seconds.
2. Setting the output duration for timer operation
Press the button FUNCTION until the display indicates »Duration Set«. Use the buttons UP and DOWN to
adjust the duration of the fog outputs in timer mode within the range of 1 and 200 seconds.
3. Setting the DMX512 address
Press the FUNCTION until the display indicates »DMX 512«. Use the buttons UP and DOWN, to set the
machine to the same address as on your DMX controller. Please refer to chapter DMX512 settings for
more information on DMX operation.
4. Switching the door sensor on and off
Press the button FUNCTION until the display indicates »DOOR ON SENSOR«. Press the button
MANUAL to deactivate the door sensor (indication » DOOR OFF SENSOR «) and the button VOLUME to
reactivate it. Please see *Note 2.
5. Direct haze
Press the button FUNCTION until the display indicates »Direct Haze«. Press the button MANUAL to
activate the direct haze mode. Then the machine directly starts producing haze after switching on the
power. The display indicates »Direct Haze« and starts flashing. To stop the haze output, shortly press
the button MANUAL again. The display stops flashing.
*
Note 1: The control of the master unit will override the control of the panel controller when
connecting the haze machine via DMX.
*
Note 2: If the haze outlet door sensor is activated (indication »DOOR ON SENSOR«), a warning
sound will beep when haze output is activated and the door is not completely open. The
flashes and indicates »DOOR CLOSED!!«. The haze production stops until the door is
completely opened. If the door sensor is not activated (indication »DOOR OFF
8