Maintenance; Faults And Remedies; Al-Ko Customer Service - AL-KO Air Premium II Mode D'emploi

Instructions for use
5.

Maintenance

Some components, based on the operating conditions, are subject to natural wear. Periodical cleaning and visual
checks are useful to prevent wear.
During maintenance and Service, the following components must be checked for wear, leaks or damage:
Air spring bellows
„
Air pipes
„
Level sensor linkages
„
Suspensions of the air supply system
„
Shock absorber
„
If the vehicle is not operated for a long time, the vehicle level can gradually lower.
To prevent deformation of the spring bumpers, in case of a long standstill the vehicle should:
be supported with AL-KO lifting supports (accessory) or
„
operated at least once a week
„
Ignition on / start the engine - moving the vehicle is not necessary
6.

Faults and remedies

If the control indicator shows faults or errors, visit the closest AL-KO authorised workshop
„
The control electronics with diagnosis capability generally allows to find the cause of the failure quickly and
„
efficiently, thus eliminating the failure promptly
In case of air loss from one or both air circuits, immediately drive - carefully and at a lower speed - to an
„
authorised workshop
For safety reasons, the air spring bellows used at zero pressure in emergency conditions must be replaced
„
Our Customer Service will be pleased to provide information on the authorised workshops and spare parts:
„
6.1

AL-KO customer service

AL-KO Kober GmbH
Ichenhauser Straße 14
89359 Kötz, Germany
www.al-ko.com
AL-KO 2008
Customer service Automotive engineering
Phone: 08221 / 97 -0
Fax: 08221 / 97 -612
e-mail: fahrzeugtechnik@al-ko.de
GB
19