Safety Instructions; Operation Instructions - AL-KO Air Premium II Mode D'emploi

4.3 Function
Button
On / Off
Normal level
Lower
Raise
Memory button
STOP
4.4

Safety instructions

Before operating the remote control, make sure that no people or valuable objects are endangered by the
„
raising and lowering operations
Before starting a lowering or raising operation, always pull the hand brake and move the gearshift to neutral
„
To prevent an extreme chassis tension, do not press the brake pedal during the lowering and raising opera-
„
tions
4.5

Operation instructions

To protect the air supply system from overload, system on-time is monitored by the control electronics
„
When the maximum on-time is reached*, the system is disconnected
„
Raising/lowering and normal level are cancelled, the control indicator in the instrument panel blinks
„
After a holding time, all functions are available again:
„
1-minute holding time:
„
30-minute holding time: for 2 minutes
„
To save the vehicle battery, the lowering and raising function should be used when the engine is running only
„
* Maximum allowed on-time: 2 minutes in a 30-minute period
18
Function
ON (control lamp is on)
OFF (control lamp turns off)
Vehicle is set to normal level
As long as the button is pressed, the vehicle is lowered up to the lower limit stop
As long as the button is pressed, the vehicle is raised up to the upper limit stop
Save:
„
Adjust the desired level with the "Raise" and "Lower" buttons.
Then save by pressing the
"M1" and "STOP" buttons or the "M2" and "STOP" buttons together.
Call:
„
Press the "M1" or "M2" buttons to set the vehicle to the stored level.
Interrupts all lowering and raising operations
„
for 15 seconds
Air Premium II
1566107_a