Instructions for use
4.
Remote control
With the remote control, you can change the vehicle level on the rear axle. A larger rear ground clearance ca be
a considerable benefit e.g. when driving offroad or on ferries.
The level selected manually remains unchanged up to a speed of 30 km/h; at higher speeds, the
vehicle is automatically set to the normal level.
4.1
Overview
7
6
Abb.3
Remote control
4.2
Connection
Abb.4
Socket position
AL-KO 2008
1
2
3
4
5
Button
Function
1
Control lamp
2
On / Off
3
Normal level
4
Stop
5
Lower
6
Raise
7
Memory buttons
Button functions are available when the ignition
is turned on only.
The remote control must always be plugged into
the socket, even when not in use.
If not, the system is not monitored by the control
electronics.
GB
17