Jacuzzi frame Manuel D'utilisation Et Entretien page 68

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

102.5
1
2
3
2
1
If no key is pressed for a few seconds, the display will show the
previous menu; to reactivate the "frequency" mode, press the "on/
off" key again).
Press the keys "<" and/or ">" to tune in the first frequency with
a strong signal.
Press the "<" or ">" key for a few seconds to stop the automatic
search, press the key "<" or ">" again for a few seconds to reacti-
vate it.
Storing the frequency
Once the frequency is adjusted, press the "on/off" key; then
press keys "<" or ">" to select the position where the selected fre-
quency should be stored (the position is shown by a broken outline).
102.5
1
2
3
4
3
Press the "on/off" key for a few seconds: the selected po-
sition will be displayed with a white background and a double
acoustic signal will sound, indicating that it has been stored.
A
4
5
2
4
5
4
102.5
1
2
5
Selecting a stored station
Press the "on/off" key until reaching the station menu (the
numbers are shown on a white background):
102.5
1
2
Then press the keys "<" or ">" to select the desired station
and press "on/off" to confirm the selection.
102.5
1
2
1
2
Turning off
Press the "note" key until the display shows the time again or,
if another electronic function is active, the respective menu (the
"note" key will remain on with a white light).
In any case, the radio will turn off automatically after one
hour, but it may be turned off (or reactivated) at any time by
pressing the "note" key.
68
3
4
5
3
4
5
3
4
5
1

Publicité

Table des Matières
loading

Table des Matières