Password Entry; Password Modification; Connection To The Bluetooth® System - Jacuzzi frame Manuel D'utilisation Et Entretien

BLUETOOTH
PAIRING PASSWORD
1
2
Press the keys "<" or ">" to activate "ON" or disable "OFF" Blue-
tooth®. Press "on/off" to confirm the selection.
If a few seconds pass without pressing any key, the control
panel will return to the "awaiting instructions" mode and then
"stand-by" (or it will display one of the hydromassage functions
presently active).
The Frame Bluetooth device® is located in the equipment
zone and is always active when Frame is on.
When disabling the Bluetooth audio function® from the box keypad,
the audio system switches itself off although it remains connected
to the external device. This permits the use of other audio functions
(Radio and Aux) and to reactivate the Bluetooth function® without
disrupting the connection with the external device.
In the instance where a second user wishes to connect via
Bluetooth,®the device will not permit this connection.

Password entry

Press the ">" key: the display will show the following configu-
ration.
Press the "on/off" key to enter or modify a password.
BLUETOOTH: ON
PAIRING PASSWORD:
0000
2
ON
1
1
BLUETOOTH
PAIRING PASSWORD:
0000
1
Press keys "<" or ">" to modify the number from 0 to 9. Press
the "on/off" key to confirm and move onto the following num-
ber. Repeat this same procedure to enter all other figures. After
having selected the last number, press the "on/off" key to con-
firm and save the password.
If a few seconds pass without pressing any key, the control
panel will return to the "awaiting instructions" mode and then
"stand-by" mode.

Password modification

To modify the password, proceed as described above and
upon finishing the modification, press the "on/off" key to con-
firm and save the new password.
Connection to the Bluetooth® system
Upon finishing the connection procedure and having secured
the connection, it is possible to use the Bluetooth audio system®
and listen to your preferred tracks.
Always place the MP3 reader in a place sheltered from water
spray and high temperatures; carry out various adjustments using
Frame's display keys.
Once linked up, the MP3 player and the Frame Bluetooth de-
vice® can be connected without having to carry out the connection
procedure each time; this connection procedure is however required
when saved settings are deleted, for example following repairs or re-
set or upon reaching a maximum number of 14 pairings.
Where a 15th pairing is recognised, the Bluetooth module® deletes all
pairings.
66
1
2