Jacuzzi frame Manuel D'utilisation Et Entretien page 63

(4) Release the button before pressing it again for a few sec-
onds (5).
4
~3"
The Turkish bath function is now available again, and the dis-
play is as shown below.
30/30
The first number below the "water-pitcher" symbol (correspond-
ing to the number of Turkish baths already performed) increases as
the "extra" Turkish baths are used (max. 10), up to 40. Use of the
function is then restricted again.
TT model
Press the "Turkish bath" button (it starts to flash). While it is flash-
ing, continuing pressing until you hear a beep (3).
1
(4) Release the button before pressing it again and holding
for a few seconds (5), until it stops flashing.
4
5
3
beep
~3"
2
~3"
5
The function is then available again (press the respective but-
ton and it flashes briefly) for 10 "extra" Turkish baths, after which
use of the function is restricted again.
All models
After the first "manual release", the scale-removal cycle can be
delayed again (again for a maximum of 10 "extra" times); this op-
eration can be repeated up to a maximum of 250 Turkish baths
(for the TOP model, however, the counter will continue to show "30")
WARNING! the value 250 has been chosen for indica-
tive purposes only; this number of baths should NEVER
be reached.
WARNING! Delaying activation of the scale-removal
cycle may seriously compromise the efficiency of the
steam generator and create potentially hazardous
situations. Jacuzzi strongly recommends running the
scale-removal cycle every time it is indicated.
6
63