Whirlpool Jets (Top/Tt Model); Shiatsu" Program - Jacuzzi frame Manuel D'utilisation Et Entretien

Whirlpool jets (TOP/TT model)

T
he jets operate according to well defined diagrams, each of
which has a program that can be customised using the control
panel:
- Shiatsu
this makes it possible to manage various jet sequences, starting
from the lower jets or from the upper ones; in this way, various body
areas are stimulated, providing a "toning" or "relaxing" massage.
- cervical/lumbar
this activates the upper jets (cervical area) or the lower jets (lumbar
area), creating a massage for the respective body areas.
- sequential
each pair of jets operates in sequence so that the various body parts
are massaged one after the other; it is also possible to exclude some
jets, concentrating the massage in a specific area.
Each jet can be tilted by pressing the nozzle and moving it in
the desired direction.
Make sure to have adjusted the water temperature and that
the control panel is in the "awaiting instructions" mode (refer
to chapters "Electronic functions - Activating the electronic
functions" and "Electronic activation of water jet functions").

"Shiatsu" program

TOP model
Press the "jet" key, the following configuration will appear on the
display:
The symbol to the left corresponds to the "shiatsu" massage,
the one at the centre to the "lumbar/cervical" massage and the
symbol on the right corresponds to the "sequential" massage.
To activate this program, make sure the indicated symbol
has been selected (otherwise, use the "<" or ">" keys). Then press
the "on/off" key.
1
2
At this point, the following configuration will appear on the
display:
1
2
Use keys "<" or ">" to select the type of desired massage and
then press the "on/off" key to activate the program.
51
1
1