Features & Controls; Touch Controls - Zephyr Okeanito COK-E36CSX Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM

Touch Controls

1. Blower On/O
By pressing the blower is switched on and o . When switched on, the blower starts up on speed level 1.
2. Speed Selection
- Press to decrease fan speed. 3, 2, 1.
- If fan is on Speed 1 and
- Press to increase fan speed. Fan On, 1, 2, 3.
- If hood is o and
3. Delay O
This feature is used for programmed shut down of blower 5 minutes after the function is activated. Press
once, a dot flashes
completely shut down after 5 minutes.
4. Lights Low/Medium/High/O
Switch lights on to low by pressing
and press again to shut o the lights.
5. Display Window
The display window indicates speed levels and features such as ba e filter clean reminder, delay o and
clean air indicator.
6. Mood Light On/O
This is the master on and o button for the mood lights. Press in to turn on, press again to turn o . When
the master mood light switch is on, pressing
will turn the LED and mood lights back on.
Okeanito Use, Care, and Installation Guide
1
Blower On/O
Display (speed level, delay o , filter clean)
5
2 Adjust 3 Speed Levels
is pressed, the fan will power o .
is pressed, the fan will turn on speed 1.
in the lower right side of display
once, press a second time for medium, press a third time for high,
Features & Controls
4 Lights Low/Medium/High/O
3 5 Min Delay O
indicating the function is on. The blower will
will power o the LED and mood lights. Pressing
6 Mood Light On/O
again
17