SOUNDMASTER NR50 Mode D'emploi page 18

 Unpack all parts and remove protective material.
 Do not connect the unit to the mains before checking the main voltage and before all other
connections have been made.
 Do not cover any vents and make sure that there is a space of several centimeters around
the unit for ventilation.
Connection
1. Plug in the AC cord to the AC outlet. Switch the unit to standby mode by turning on the Main
power switch. The unit will go to standby mode and the LCD display will dim light up.
2. Turn on the unit, if the LCD display is on with backlighting, it means the power supply is
normal. Now your system is ready to play the music.
Remark: Due to ErP stage two requirements and protect the environment. The unit will switch to
standby mode automatically once no any music playing over 15 minutes.
Setting the clock
1. Set the unit in standby mode.
2. Press the "Mem/Clk-Adj" button until display flashes "24HR". Press the Skip Up
button to select the clock format between 12 or 24Hour. Then press the "Mem/Clk-
Down
Adj" button.
3. The first digit of "0:00" is flashing on the LCD display. Press Skip Up
button to set the correct hour. Press "Mem/Clk-Adj" button to store the correct hour.
4. The third & fourth digit of "00" is flashing, press the Skip Up
set the correct minutes. Then press "Mem/Clk-Adj" button to store the correct minute.
The clock setting mode will automatically quit if no button is being pressed in a period of
about 5 seconds.
Manual Tuning
1. Plug in the provided DAB/FM tuner antenna to the antenna socket then switch on the unit by
pressing the On/Standby button, then press Function button (2) to select "FM" mode.
2. Tune to the required station by tuning knob.
3. Turn the Volume knob to the desired volume level.
Auto tuning
1. Set the unit to FM mode.
2. Press the Scan button once; unit will start to scan at tuning up direct until radio station
received. Press and hold the Scan button for a second, the unit will scan to tuning down
direction. If the radio data system (RDS) broadcasting signal received, the unit will set the
actual time automatically.
3. Turn the Volume knob to the desired volume level.
INSTALLATION
RADIO
3
NR50 / English Instruction Manual
or Skip
or Skip Down
or Skip Down button to