References - Sophysa PRESSIO Notice D'utilisation

NOTE
The emission characteristics of this equipment make it
suitable for use in industrial areas and hospitals (CISPR
11 class A). If it is used in a residential environment (for
which CISPR 11 class B is normally required) this
equipment might not offer adequate protection to radio-
frequency communication services.
You might need to take mitigation measures, such as
relocating or re-orienting the equipment.

12. References

®
Table 3. Pressio Catheter Kits
®
PSO-PB Pressio ICP monitoring kit, parenchymal with bolt
®
PSO-PBT Pressio ICP and ICT monitoring kit, parenchymal with
bolt
®
PSO-PT Pressio ICP monitoring kit, parenchymal tunneling
®
PSO-PTT Pressio ICP and ICT monitoring kit, parenchymal tunnel-
ing
®
PSO-VT Pressio ICP monitoring kit, ventricular tunneling
with external CSF drainage function
®
PSO-VTT Pressio ICP and ICT monitoring kit, ventricular tunneling
with external CSF drainage function
®
Table 4. Pressio Monitoring System
®
PSO-4000 Pressio 2 ICP Monitor
Power Cable and Catheter Extension Cable (PSO-EC30)
included
®
Table 5. Pressio Accessories
PSO-EC30 Catheter extension cable (included with PSO-4000, al-
so available separately)
PSO-MCxx Pressure cable
– MC01: PHILIPS (AGILENT) - 12 pins
Also compatible with Philips (Intellivue, Efficia), Mind-
ray
– MC02: SIEMENS (SIRECUST) - 10 pins
Also compatible with Dräger (Infinity)
– MC03: SPACELABS & MINDRAY - 6 pins
– MC04: GE DATEX-Ohmeda - 10 pins
– MC05: GE Solar (MARQUETTE) - 11 pins
Also compatible with GE Carescape
– MC06: HELLIGE - 10 pins
– MC07: SIEMENS - 7 pins
Also compatible with Dräger (Infinity)
– MC08: NIHON KOHDEN - 5 pins
– MC10: DATASCOPE - 6 pins
PSO-MCT-y Temperature cable
– MCT-A: PHILIPS (AGILENT) - 2 pins
Also compatible with Philips (intellivue, Efficia)
– MCT-B: SIEMENS - 7 pins
Also compatible with Dräger (Infinity)
– MCT-C: SPACELABS - 10 pins
– MCT-E: GE Solar (MARQUETTE), GE DATEX-Ohme-
da - 11 pins
– MCT-F: HELLIGE, DATEX-Ohmeda, NIHON KOH-
DEN, MINDRAY & DATASCOPE - JACK 6.35 mm
Table 6. Year of first CE marking
PSO-EC30
PSO-MCxx
PSO-MCT-y
®
Pressio Cables comply with the following standards:
– EN ISO 14971: 2019
– IEC 60601-1: 2012
– IEC 60601-1-2: 2014
– NF EN 62366-1:2008
– IEC 60601-1-6: 2010
– ISO 10993-1: 2018
Technical specifications and list of product references may
be modified without notice.
Availability may vary according to country.
2016
2005
2010
Page 11 of 44