Use; Switching On The Appliance - Krups EA 80 Serie Utilisation Et Entretien

KRUPS Espresseria Automatic

4 Use

Respecting the instructions below will
ensure good results. Several tests will
probably be required to find the mix and
roasting of the coffee beans to your
taste.
The quality of the water used is also a
factor in the taste of your coffee. Ensure
that the water is fresh from the tap, that it
is cold and that it does not smell of
chlorine.
Do not use stagnant water.
The coffee outlet
The height of the coffee outlet is
adjustable. Raise it to fit or remove taller
The steam nozzle
The steam nozzle can be moved to the
left or right and tilted forward slightly,
The drip tray
This tray collects the water used by the
appliance or spilled during preparation.
When the blue parts of the water level

4.1 Switching on the appliance

☞ Press the ON/OFF button (1).
The indicator light flashes: the appliance
is preheating.
When the preheating phase is complete,
the light remains lit: the appliance s ready
to use.
☞ Press the Service button (8) if you want to
rinse the appliance (see point 3.4).
If you want to prepare an espresso or a coffee, read the instructions in point 4.2. To prepare a
cappuccino, refer to point 4.3.
18 Use and maintenance / SERIE EA 80xx
Caution :
Your appliance is only des-
!
igned to use coffee beans. When prepa-
ring your first coffee, after several days
without using the machine or after car-
rying out maintenance, a little steam or
hot water will come out of the steam noz-
zle. Keep at a safe distance from the
steam nozzle and place a cup underneath
the outlets to avoid any risk of burns or
splashes with the steam or hot water.
cups more easily.
which allows the cup underneath to be
removed more easily.
float are visible, the tray needs to be
emptied.
Note : If the machine has not been
!
used for several days, it must be rinsed.