Krups EA 80 Serie Utilisation Et Entretien page 49

Installing the filter cartridge (optional)
The Krups Aqua Filter System F088 car-
tridge improves the taste of your water. It
is made of an anti-scale substance like
activated carbon, which reduces chlorine,
impurities, lead, copper, pesticides, etc.
present in water
(Reduction of the carbonate hardness of
☞ Remove the filter cartridge and the car-
tridge fitting accessory from the packa-
ging and assemble the cartridge fitting
accessory as illustrated.
☞ Set the month when the cartridge is fitted
(position 1 on the illustration, left side fi-
gure in the opening) by turning the grey
ring located on the upper end of the filter.
The month that the filter is to be replaced
is indicated on the right side in the ope-
ning (position 2 on the illustration).
☞ Attach the cartridge fitting accessory to
the filter cartridge as shown in the illustra-
tion.
☞ Screw the filter cartridge into the screw
thread at the bottom of the water tank:
1. Place the filter cartridge into the
thread.
2. Screw in the cartridge.
☞ Remove the cartridge fitting accessory
from the filter cartridge.
!
Note: the filter cartridge has to be repla-
ced approximately every 50 litres of water
or at least every 2 months.
☞ Place a recipient of a capacity of around 0.5 litre under the steam nozzle (25) and press
the Service button (8) until the ON/OFF indicator light (1) starts flashing.
The filter cartridge is filled with water and approximately 300 ml of water passes through
the steam nozzle.
Use and maintenance / SERIE EA 80xx
KRUPS Espresseria Automatic
up to 75%*, chlorine up to 85%*, lead up
to 90%*, copper up to 95%*, aluminium
up to 67%*). Minerals and trace elements
are conserved.
* Measures provided by the manufacturer
13