Krups EA 80 Serie Utilisation Et Entretien page 62

KRUPS Espresseria Automatic
☞ Once the cleaning cycle is finished, the
"clean" indicator light will flash again.
Empty the recipient and put it back under
the coffee tubes and steam nozzle.
☞ Press the "Service" button.
☞ The "clean" indicator light will remain lit
Once the first rinsing cycle is finished, the
"clean" indicator light will flash again.
☞ Empty the recipient and put it back under
the coffee tubes and steam nozzle.
☞ Press the "Service" button.
The "clean" indicator light will remain lit.
Once the second rinsing cycle is finished,
the "clean" indicator light will be extingui-
shed.
☞ Remove the recipient and empty it.
☞ Empty the drip tray and fill the water tank.
Caution: If the cleaning programme
!
is interrupted by a power cut or acciden-
tal unplugging of the machine, it must be
started again from the beginning. A new
cleaning tablet will be required in this
26 Use and maintenance / SERIE EA 80xx
i
Info : The first rinsing cycle starts and
runs automatically. It allows the rest of the
cleaning product to be eliminated from inside
the appliance. This first cycle lasts around 5
minutes.
i
Info : The second rinsing cycle starts and
runs automatically. This second cycle lasts
around 5 minutes.
case. The programme must be started
again completely in order to rinse the
water circuit and eliminate any traces of
harmful cleaning products.