Use And Maintenance - Krups EA 80 Serie Utilisation Et Entretien

Masquer les pouces Voir aussi pour EA 80 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 72
Children
Keep the appliance out of the reach of
children.
This appliance must not be used by
children or by persons with diminished
physical, mental or sensorial capacities
or lacking experience or knowledge. They
must be watched or be instructed by a
responsible person to ensure that they
The appliance
Do not pour water into the coffee bean
holder and/or under the maintenance
cover, as this may cause overflows.
Except for cleaning and descaling as
described in the procedures in the
instructions for the appliance, all work on
the appliance must be carried out by a
KRUPS' Approved After-Sales Service
Centre.
For your safety, only use KRUPS
approved accessories and consumables
for your appliance.
Unplug the appliance when leaving the
room or the home for prolonged periods,
as in the event of a failure the appliance
may overheat and cause a fire.
WARNING - Do not open the
appliance as there is a high risk of fatal
injury due to electricity! Any unauthorised
opening of the appliance invalidates the
guarantee. Do not use the appliance if it

Use and maintenance

In the event of a problem or incorrect
operation, check the appliance and try to
resolve the problem (see chapter 6
Troubleshooting) or have the appliance
repaired if the problem persists. When
the appliance cannot operate without risk
of danger, unplug it from the mains
socket.
Always refer to the instructions in this
manual for the descaling of the
appliance. Unplug from the socket before
Use and maintenance / SERIE EA 80xx
KRUPS Espresseria Automatic
can use the appliance in complete safety.
Children must be watched by a
responsible person to ensure that they
do not use the appliance as a toy.
is not operating correctly, if it has been
dropped, if it is leaking or if it has been
damaged. In this case, we recommend
having the appliance checked by a
KRUPS' Approved After-Sales Service
Centre (see list in the KRUPS service
handbook).
For safety and approval (CE) reasons,
any transformation or modification of the
appliance, carried out by an individual, is
prohibited as only tested appliances have
been approved and the manufacturer is
absolved of all responsibility in the event
of damage.
any cleaning or maintenance operation.
In the case of descaling, cleaning or
regular maintenance not being carried
out or if there is a foreign particle in the
grinder, this is not covered by the
product guarantee (see separate
document).
7

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières