Eu Declaration Of Conformity - Desoutter Industrial Tools ELB2.5-1250-P Mode D'emploi

Safety Information
Model
ELS8-400-P4S
ELS8-800-P
ELS12-400-P4S
ELS12-600-P
Weight
(kg)
All models 0.8
Part number Description
6158132660 18V battery
pack
6158132670 36V battery
pack
The weight is given without the battery pack.
Wireless Communication specifications
Band with maximum radio output power
2400 MHz - 2483,5 MHz
5150 MHz - 5350 MHz
5470 MHz - 5725 MHz
5725 MHz - 5875 MHz
Type
RED IEEE 802.11 b/g/n
Maximum RF output power
Storage and use conditions
Storage temperature
Operating temperature
Storage humidity
Operating humidity
Altitude up to
Usable in Pollution degree 2
environment
Indoor use only
Declarations
Liability
Many events in the operating environment may affect the
tightening process and shall require a validation of results. In
compliance with applicable standards and/or regulations, we
hereby require you to check the installed torque and rota-
tional direction after any event that can influence the tighten-
ing result. Examples of such events include but are not lim-
ited to:
120 / 400
300 / 765
120 / 400
250 / 570
(lb)
1.76
kg lb
460 1.01
770 1.70
17.6 dBm
16.6 dBm
17.3 dBm
12.1 dBm
IEEE 802.11a/b/g/n
2400 - 2483.5 MHz 20 dBm
(100 mW).
< 20 dBm
-20 to +70 °C (-4 to +158 F)
0 to 40 °C (32 to 104 F)
0-95 % RH (non-condensing)
0-90 % RH (non-condensing)
2000 m (6562 feet)
• initial installation of the tooling system
• change of part batch, bolt, screw batch, tool, software,
configuration or environment
• change of air- or electrical connections
• change in line ergonomics, process, quality procedures
or practices
• changing of operator
• any other change that influences the result of the tighten-
ing process
The check should:
• Ensure that the joint conditions have not changed due to
events of influence.
• Be done after initial installation, maintenance or repair
of the equipment.
• Occur at least once per shift or at another suitable fre-
quency.

EU DECLARATION OF CONFORMITY

We, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint
Herblain, France, declare under our sole responsibility that
the product (with name, type and serial number, see front
page) is in conformity with the following Directive(s):
2006/42/EC, 2014/30/EU, 2011/65/EU, 2014/53/EU
Harmonized standards applied:
For ELB, ELS series
EN 62841-2-2:2014+C1:2016; EN
61000-6-2:2005+C1:2005; EN 61000-6-3:2007+A1:2011;
EN 55014-1:2017; EN 55014-2:2015; EN 62311:2008
For ELC series
EN 62841-2-2:2014+C1:2016; EN
61000-6-2:2005+C1:2005; EN 61000-6-4:2007+A1:2011;
EN 55014-1:2017; EN 55014-2:2015; EN 301 489-17
V3.2.2; EN 300 328 V2.2.2; EN 301893 V2.1.1; EN 300
440 V2.2.1
Authorities can request relevant technical information from:
Pascal ROUSSY, R&D Manager, 38 rue Bobby Sands,
44818 Saint Herblain, France
Saint-Herblain, 31/01/2022
Pascal ROUSSY, R&D Manager
Signature of issuer
4 / 208 04/2022