Product Information; Description; Features - Franklin Electric SUBMONITOR CONNECT Manuel D'installation Et D'utilisation

PRODUCT INFORMATION

Description

The SubMonitor Connect is a motor and pump protection relay for three-phase motors and pumps.
SubMonitor Connect is available as a stand-alone component (MT1111 and MT6111) for installation inside your
control panel, and is also integrated into Franklin Electric SMS Starter and Soft Starters panels (MT1311 and
MT2211). The SubMonitor Connect provides real-time performance monitoring and protection against
adverse conditions such as dry well conditions, clogging, bound pumps, and electrical power issues. It
features programmable control of inputs and outputs
through an integrated, removable NEMA 4X rated display,
as well as Modbus and Bluetooth connectivity.

Features

Configuration
• Easy 9-step setup wizard with built-in application
defaults
• Preset protection parameters for submersible and sur-
face motor types
• Easy access to input and output terminals
• Detachable 32 character back-lit NEMA 4X, wash-
down rated display can be mounted on the front panel
to allow for safe viewing of conditions while motor is
operating.
Operation
• Multiple language support
• Integrated 32 character display with simplified menus
• Real-time fault logging with date/time stamps
• Hand/Off/Auto (HOA) switch (MT1311 and MT2211 models)
Protection
• Protects motors from overloads, underpower, over-voltage, under-voltage, unbalanced currents and
voltages, phase reversal, and insulation leakage.
• Monitors and displays three-phase voltages, currents, and power, accurate to 1%
• Motor winding insulation check
• Dry well protection
• Rapid Cycling
• Records and displays a history of 150 faults, last 25 setting changes, and 25 start information, all with
real-time clock date and time stamping accurate to one second.
Communication
• Bluetooth connectivity with the FE Connect mobile application for setup, monitoring, mobile control,
and troubleshooting.
• Built in Modbus RTU communication protocol capable of baud rates up to 115200 for remote monitor-
ing or control.
PRODUCT INFORMATION
Description
5