Monitoring Functions - Franklin Electric SUBMONITOR CONNECT Manuel D'installation Et D'utilisation

OPERATION

Monitoring Functions

Monitoring Functions
Main Menu Displays
Real-time system status can be viewed from the main display by scrolling through the Quick View screens.
Scrolling further will cycle through the other monitoring and programming menus, eventually returning to
the Home screen.
NOTE:
The FE Connect mobile app can also be used to view real-time SubMonitor Connect system status.
Refer to "FE Connect Mobile App" on page
Display upon Power On
ENTER
Press to start the SubMonitor Connect,
and the next display is:
Home Display
Shows that the device is running or stopped,
average voltages and amps.
DOWN
Press to see the next display:
Quick View 1
Shows the voltage and amperages for the
three phases of power.
DOWN
Press to see the next display:
Quick View 2
Shows the wattage, power factor, and kilowatt
hours.
DOWN
Press to see the next display:
28
35.