Position The Blower Location Template - KitchenAid KSDG950ESS Manuel Du Propriétaire

Position the Blower Location
Template
1. Determine and mark the centerline on the floor of the cabinet
opening.
A. Centerline
2. Locate the blower location template in the Installation Parts
Kit.
3. If the countertop extends behind the opening, measure the
distance from the back edge of the cabinet cutout to the wall.
A. Countertop Filler Depth
4. Fold the top of the blower mounting/venting template on the
line that corresponds to the countertop depth measured in
Step 3.
NOTE: The template has lines every 1/4" (6.4 mm) from the
back edge. If the distance measured in the previous step is
1 1 / " (32 mm), fold the template on the line labeled
4
1 1 / " (32 mm). If there is no countertop filler depth, fold the
4
template at zero depth.
5. Align the template centerline with the centerline marked on the
floor. Align the folded edge of the template against the rear
wall.
NOTE: Secure the template to the floor with tape.
17