Memory gauge
The memory gauge lights when you take a picture. When the gauge is lit, the
camera is storing a picture on the card (xD-Picture Card). The memory gauge
indication changes as shown below depending on the shooting status. When
the memory gauge is full, wait until the light goes out before you take any
more shots.
When taking still pictures
Shoot
Wait
Before shooting
(Gauge is off)
When recording movies
Shoot
Wait
Before shooting
(Gauge is off)
Battery check
If the remaining battery power is low, the battery check indication changes as
follows when the camera is turned on or while the camera is in use.
Lights
(green)
Ready for shooting.
If you continue shooting
During shooting (Gauge lit)
If you continue shooting
During shooting (Gauge lit)
● Shooting is not possible until the light goes out completely.
● Movie recording finishes automatically when the memory
gauge is fully lit.
Lights
(red)
Remaining power level: low. If
you plan to use the camera
for a long time, charge the
battery soon.
Monitor indications
No indication
(The green lamp and
orange lamp next to the
viewfinder blink.)
Remaining power level:
exhausted. Replace with a
charged battery.
En
9