Shooting
Movie recording
En
Available
modes
1
Point the camera towards a subject, and place the subject on the AF
target.
● The total possible recording time and the
monitor.
● Focus locks when the shutter button is pressed halfway.
2
Press the shutter button all the way to start recording.
● The number of seconds remaining appear.
● During movie recording,
3
Press the shutter button all the way to stop recording.
● The card access lamp blinks and the camera begins storing the movie
on the card. You cannot record another movie as long as the card
access lamp is blinking.
● When the card access lamp stops blinking, the camera has finished
writing the movie to the card. If there is any space left on the card, the
number of seconds remaining is displayed. You can start recording
another movie.
● If the displayed seconds remaining reach "0", shooting finishes automatically
and the camera starts writing the movie to the card.
24
mark are displayed on the
lights in red.