Clutch Control - Iseki YB27L Notice D'emploi

Work tools/plant-protector disk
Your machine is
equipped with
double crowns Ø
300 mm which
make it possible
to work a width
of 0.36m (A).
Do not use rotating tools with a diameter greater than
325mm. Make sure of the direction of assembly of the
tines and the pins.
Description of the controls
Throttle
Fast
Slow
Stop
To operate, push the front black lever down.
To reverse, push the red reverse lever.
To stop the tools, release the lever.
Description of the clutch lever
Bevelled edge
When assembling
the crowns, make
sure that the
bevelled edge of
the tools is in the
direction of
movement, facing
forward.
Attention:
the rotary tiller
not suitable for working on ground covered by compact law, on
difficult, rocky terrain, and hard soil, etc.

Clutch control

1
Direction of
cultivation
Sense of rotation
2
14